Hi Everyone, I bought a Focus 1.6 TDCI 05 reg, second hand about a year ago and its done 130k miles. Ive replaced the air filter and a complete oil change myself, but a few weeks ago I started having problems.
Help! I have been digging through many previous threads but am struggling to resolve my issue. I have a no crank situation on my 2010 Focus 1.6 diesel. It has sporadically started in the past, and once running was fine, but now has stopped altogether.
Name: Allen. Ford Model: Focus. Ford Year: 2005. UK/Ireland Location: Worcestershire. Posted July 29, 2014. Hi All, I have a bit of a problem with my 2005 Mk2 1.6 tdci Focus. It has no DPF, so any problems with that can be discounted. The problems began last winter, when the car would occasionally start up in limp mode on cold mornings.
Posted February 17, 2022. I recently changed the injector to cylinder 2 after a breakdown (code P1262) with a replacement part from Ford. Easy enough change and correction codes entered using FORScan and an OBD2. Since changing the errors have gone and codes cleared themselves but the cars not right.
Some help needed please! I have a Focus Estate MK2 1.6 TDCi, and recently it's developed a fault where after taking engine revs over around 2000rpm, and then depressing the clutch to change gear, the engine will stall. It can go a little over 2000, but not much. When it stalls, the engine restarts, but it has to turn over a few times before it
Hey, I'm new to this so I'll try give as much info as I can. I have a ford focus style 2008 1.6 tdci 110bhp, I was driving down the motorway when I lost power in 4th And 5th gear, my breakdown service took my car to a local garage and told me my turbo had gone. They replaced my turbo which cost m
Morning, looking for some help. I have just purchased a Connect 1.6TDCi 115ps 2015my, 89834 miles. after 2 days the temp warning light came on red and the coolant fan was running on after engine stop. Also temp gauge stopped working. Checked the reservoir and it seemed very dark and empty, remove
Hi peeps, hoping some advice can help me. 2012 mk3 focus 1.6L diesel model. Engine is running rough / mis-firing, engine management light came on, I checked and cleared the fault codes with my ForScan and the EML cleared but the car was still undriveable as still mis-firing. Fault code = P1263 -
Cars with the DLD-416 DV6 engine goes more than 100,000 miles without any problems. One serious issue with the 1.6 TDCI is turbo failure. Oil supply troubles due to sludge build-up in the oil feed pipes can cause a blown Turbo.
I'm having exactly the same problem with my, 2006, 1.8 TDCi (Code 1- 6) 2008 Ford Focus Ztec - engine issue. GingerOverlord · Started Monday at 12:01 PM. 4.
I've decided to give up lurking and start posting as I have a bit of an issue with my Focus 1.6 TDCI. 109. The car is a 08 plate, one of the few facelifts on the 08 plate. The engine has done
Ford Model: Mk 2.5 Focus 1.6 tdci & Mk 3 1.6 tdci Ford Year: (which a petrol engine does more) Front fog light problem.
1.6 Tdci Emissions Failure. My father's 07 Focus 1.6 TDCi failed its MOT emissions test badly (9.99 PPM which was the maximum reading of the tester!). The limit is 3.0! I'm not very familiar with this engine but checked the air filter, stuck the endoscope into the inlet manifold (a bit grubby in there) and checked for trouble codes.
I have a 59 plate 1.6 TDCI with 115k on the clock. I've had it since 9k miles and it's always been dealer serviced (for what it's worth), on time. I am getting P0299 with Engine Malfunction, pretty reliably when I floor the accelerator.
We have heard of a few people complaining about some Focus 1.6 TDCI turbo problems. The 1.6 TDCI engine is also used in other vehicles including Volvo, Suzuki, Peugeot, Mini, and Ford. But one of the most commonly affected models is the Ford Focus that uses this engine.
The "Engine System Fault" message on the dashboard after a few moments running was the initial indication of a problem. Focus 1.6 tdci Ford Engine Malfunction
gPhm4.
